TRAINING HYSIS FIELD PROCESS ENGINEERING DESIGN FOR OIL GAS

November 28, 2018 admin OIL & GAS 0

TRAINING HYSIS FIELD PROCESS ENGINEERING DESIGN FOR OIL GAS

Training Desain Teknik Proses Hysys Lapangan Untuk Gas Minyak

Training Component And Component Behavior

Pelatihan Hysis Field Process Engineering Design For Oil Gas Di Jogja

OBJECTIVES
1. Understand the basic concept of oil , gas and water handling processes and facilities, and how to operate this technology in field application.
2. Diagnostic of oil and gas reservoir performance under actual drive mechanism and future performance with current handling processes.
3. Analyze the production potential of reservoir under with actual handling system processes and to plan the better development processes according to reservoir capacity.
4. Understand the fundamentals of microscopic and macroscopic aspects and phenomena of oil, gas and water handling processes.

TRAINING OUTLINES

Introduction
1. The role and responsibility of each member of discipline
2. The different type of project that proses engineering are involved with
3. The complexities of a project
4. A basic understanding of the deliverables each type of project.
5. A basic understanding of the schedule for the different type of project

Process Simulator
1. What is process simulator
1. What are they
2. How they are used
3. How to determine the suitable one
2. Process simulator needs
1. Component and component behavior
2. Process flowsheet or description
3. Operating condition or design specification
4. Calculate steady state process of heat and mass flow
5. Model the surface facilities and gas plant
6. Design or process evaluation
3. Step to modular simulation(Hysis)
1. Specify component and thermodynamic model
2. Define process configuration
3. Specify stream or unit operation connectivity
4. Operation parameters are ready
5. Run simulation
6. Result Checking
7. Check the simulation result is in line with the real design practice
8. Verify the result

Process Simulation Unit Operation
1. Select Hysis calculation block to represent process equipment
2. Understanding of unit operation in Hysis
3. Understanding single stage separation in Hysis

Process Simulation – Set & Adjust
1. Describe the characteristic of feed forward controller
2. Describe the characteristic of feedback controller
3. Understand how to use SET as feed forward controller
4. Understand how to ADJUST as feedback controller

Process Simulation – Crude Stabilizer
1. Understand stream mixing and splitting block
2. Understand pressure change block
3. Select suitable heat transfer block
4. Model a simple crude stabilizer

Recycle Stream
1. Select suitable tear stream
2. Installing recycle loop stream

INSTRUKTUR

Sigit Budi, ST., MT and team

PARTICIPANTS

Senior operators, Junior operators, Junior production engineers and supervisors, Well service engineers and supervisors, Materials, Logistics and warehouse personnel, Work over and Well services engineers and supervisors

METODE

Lecturing, presentasi, diskusi interaktif, sharing, studi kasus

Karena kompleksnya pelatihan ini, maka dibutuhkan pendalaman yang lebih komprehensif melalui sebuah training. Dan menjadi sebuah kebutuhan akan training provider yang berpengalaman di bidangnya agar tidak membuat peserta menjadi cepat bosan dan jenuh dalam mendalami bidang teknik ini.

JADWAL PELATIHAN 2025

  • BATCH 1 : 13-14 Januari 2025
  • BATCH 2 : 10-11 Februari 2025
  • BATCH 3 : 10-11 Maret 2025
  • BATCH 4 : 14-15 April 2025
  • BATCH 5 : 15-16 Mei 2025
  • BATCH 6 : 12-13 Juni 2025
  • BATCH 7 : 10-11 Juli 2025
  • BATCH 8 : 18-19 Agustus 2025
  • BATCH 9 : 17-18 September 2025
  • BATCH 10 : 16-17 Oktober 2025
  • BATCH 11 : 13-14 November 2025
  • BATCH 12 : 15-16 Desember 2025

Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta

Lokasi Pelatihan Jenis Public Speaking Di Jogja :

  • Yogyakarta, Hotel Dafam Malioboro (6.000.000 IDR / participant)
  • Jakarta, Hotel Amaris Tendean (6.500.000 IDR / participant)
  • Bandung, Hotel Golden Flower (6.500.000 IDR / participant)
  • Bali, Hotel Ibis Kuta (7.500.000 IDR / participant)
  • Lombok, Hotel Jayakarta (7.500.000 IDR / participant)

Investasi Pelatihan  ini :

Investasi pelatihan tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas

  • FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
  • FREE Akomodasi Peserta ke tempat pelatihan bagi peserta
  • Module / Handout
  • FREE Flashdisk
  • FREE Bag or bagpackers (Tas Training)
  • Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  • 2xCoffe Break & 1 Lunch, Dinner
  • FREE Souvenir Exclusive

TRAINING HYSIS FIELD PROCESS ENGINEERING DESIGN FOR OIL GAS

DESKRIPSI

Process Engineer

Design Engineer

Manajer Operasional

Supervisor Teknik

Engineer Proses

Pelatihan HYSIS Field Process Engineering Design for Oil Gas sangat penting untuk memberikan keterampilan dalam merancang dan mengoptimalkan proses pengolahan minyak dan gas di lapangan. Dengan menggunakan perangkat lunak HYSIS, peserta dapat memodelkan, menganalisis, dan mengoptimalkan desain proses yang kompleks, yang memungkinkan pengambilan keputusan yang lebih tepat dalam operasional. Pelatihan ini akan membantu peserta memahami berbagai parameter teknis dan proses desain yang efektif, serta bagaimana menerapkannya dalam situasi lapangan untuk meningkatkan efisiensi, keselamatan, dan keberlanjutan operasional di industri migas.

Training ini membahas mengenai Desain proses minyak dan tidak tuntas jika dipelajari dalam hitungan jam. Oleh karena itu, diperlukan waktu tersendiri dan bimbingan yang profesional.

MATERI

Introduction

  1. The role and responsibility of each member of discipline
  2. The different type of project that proses engineering are involved with
  3. The complexities of a project
  4. A basic understanding of the deliverables each type of project.
  5. A basic understanding of the schedule for the different type of project

Process Simulator

  1. What is process simulator
  2. What are they
  3. How they are used
  4. How to determine the suitable one
  5. Process simulator needs
  6. Component and component behavior
  7. Process flowsheet or description
  8. Operating condition or design specification
  9. Calculate steady state process of heat and mass flow
  10. Model the surface facilities and gas plant
  11. Design or process evaluation
  12. Step to modular simulation(Hysis)
  13. Specify component and thermodynamic model
  14. Define process configuration
  15. Specify stream or unit operation connectivity
  16. Operation parameters are ready
  17. Run simulation
  18. Result Checking
  19. Check the simulation result is in line with the real design practice
  20. Verify the result

Process Simulation Unit Operation

  1. Select Hysis calculation block to represent process equipment
  2. Understanding of unit operation in Hysis
  3. Understanding single stage separation in Hysis

Process Simulation – Set & Adjust

  1. Describe the characteristic of feed forward controller
  2. Describe the characteristic of feedback controller
  3. Understand how to use SET as feed forward controller
  4. Understand how to ADJUST as feedback controller

Process Simulation – Crude Stabilizer

  1. Understand stream mixing and splitting block
  2. Understand pressure change block
  3. Select suitable heat transfer block
  4. Model a simple crude stabilizer

Recycle Stream

  1. Select suitable tear stream
  2. Installing recycle loop stream

SIAPA YANG DAPAT MENGIKUTI TRAINING INI? !!!

TRAINER PADA TRAINING INI

Instruktur yang berpengalaman dalam bidang Hysis untuk migas akan mengisi Training Desain proses minyak

JADWAL PELATIHAN 2025

  • BATCH 1 : 13-14 Januari 2025
  • BATCH 2 : 10-11 Februari 2025
  • BATCH 3 : 10-11 Maret 2025
  • BATCH 4 : 14-15 April 2025
  • BATCH 5 : 15-16 Mei 2025
  • BATCH 6 : 12-13 Juni 2025
  • BATCH 7 : 10-11 Juli 2025
  • BATCH 8 : 18-19 Agustus 2025
  • BATCH 9 : 17-18 September 2025
  • BATCH 10 : 16-17 Oktober 2025
  • BATCH 11 : 13-14 November 2025
  • BATCH 12 : 15-16 Desember 2025

Calon peserta dapat menyesuaikan jadwal tersebut sesuai dengan kebutuhan

 

LOKASI

  • Yogyakarta, Hotel Dafam Malioboro (6.000.000 IDR / participant)
  • Jakarta, Hotel Amaris Tendean (6.500.000 IDR / participant)
  • Bandung, Hotel Golden Flower (6.500.000 IDR / participant)
  • Bali, Hotel Ibis Kuta (7.500.000 IDR / participant)
  • Lombok, Hotel Jayakarta (7.500.000 IDR / participant)

 

INVESTASI

Investasi pelatihan tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

 

BENEFIT

  • Module / Handout
  • FREE Flashdisk
  • FREE Bag or bagpack (Tas Training)
  • Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  • 2x Coffee Break & 1 Lunch
  • FREE Souvenir Exclusive

Post Views: 206